Removing a tube of caulk from a caulking gun can be a challenge. If you don’t have the right tools, it can be difficult and frustrating. In this blog post, we will show you how to remove a tube of caulk from a caulking gun using two different methods. We hope you find this information helpful!
Ways to remove a tube of caulk from a caulk gun
There are two methods that can be used to remove caulk tube from gun. The first method is to use a utility knife. First, cut the tip of the caulk tube at a 45-degree angle. Next, insert the blade of the utility knife into the opening of the caulk tube and twist it to cut the seal. Finally, pull the tube of caulk out of the gun.
The second method is to use a pair of pliers. First, grip the caulk tube with the pliers and twist it to break the seal. Next, pull the tube of caulk out of the gun.
Which method you use will depend on the type of caulking gun you have. If you have a manual caulking gun, you will likely find it easier to use the utility knife method. If you have an electric caulking gun, you may find it easier to use the plier’s method.
How do you clean a caulking gun?
Once you have removed the tube of caulk from the caulking gun, it is important to clean the gun. If you do not clean the gun, the caulk will harden and you will not be able to use it again. To clean the caulking gun, remove any remaining caulk from the gun using a putty knife. Next, clean the gun with a rag and soapy water. Finally, dry the gun with a clean rag.